The heating device of newborns with phototherapy FTN-03F is intended for heating and/or holding a session of newborn phototherapy (the treatment of Hyper-bilirubinemia). The heating device of newborns with phototherapy FTN-03F purpose is used in intensive care units of maternity hospitals and children's hospitals. The use of the device provides convenience for medical personnel when carrying out everyday procedures with newborns.

SPECIFICATIONS:

Overall dimensions - no more 770x1150x1950 mm (without rotating elements)
The mains alternating current (220±22) V / 50 Hz
Power consumption - not more than 1000 VA
Range of temperature regulation from +30 to +38 With
The error of temperature measurement in the range from +30 to +38 ° C - not more than ±0.3°C.
Error automatically maintain the temperature - ±1°C.
Setpoint resolution temperature regulation - 0.1°C.
The emission intensity of blue light - not less than 1200 µw/cm2.
Weight - 70 kg.
Setup and readout time of the session of phototherapy is from 0 to 99 hours, 59 minutes.
The illumination level of the patient of at least 500 Lux.
Distance from the heater to the bed - 850 mm±50 mm.
Continuous operation time - not less than 4 days.

Infrared ceramic heater – primary heating source;
The possibility of holding a session of phototherapy session simultaneously with the heating, in automatic or manual modes;
The presence of additional heating source, a flexible heating element installed in the hot pillow;
The presence of LEDs, emitting blue light with a wavelength of (465±15) nm for treatment of hyperbilirubinemia;
The stock brakes on two wheels;
There are two shelves for the convenience of staff;
Use the skin sensor to control the heating temperature;
Manual mode and "Timer";
The presence of an alarm system with a simultaneous audible and light alarm in case of occurrence of malfunctions, exceeding the t° on the patient's skin over 38.5 C. or deflection t° from set point more than ±1C.

 12 month warranty.